Product ID:X-40 FOAM PART B, RT-5070-B
MSDS Date:03/08/1988
FSC:8030
NIIN:00N027856
Kit Part:Y
MSDS Number: BMSCQ

RESIN TECHNOLOGY CO

2270 CASTLE HARBOR PLACE
ONTARIO, CA 91761
US

Emergency Phone: 714-947-7224

Info Phone: 714-947-7224

Cage: RTECH

RESIN TECHNOLOGY CO

ONTARIO, CA 91761 US

Telephone: 714-947-7224

Cage: RTECH

POLYETHER POLYOL

Fraction By Weight: 25-35%

POLYESTER POLYOL

Fraction By Weight: 10-20%

FLAME RETARDANT; (PHOSPHATE FLAME RETARDANT)

Fraction By Weight: 5-10%

AMINE CATALYSTS; (AMINE BASED CATALYSTS)

Fraction By Weight: <01%

METHANE, TRICHLOROFLUORO-; (TRICHLOROFLUOROMETHANE)

CAS: 75-69-4

RTECS: PB6125000

Fraction By Weight: 25-30%

OSHA PEL 1000 PPM

ACGIH TLV: C, 1000 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:NONE KNOWN IF CONC ARE
MAINTAINED BELOW TLV LEVELS. EXPOS ABOVE TLV MAY RESULT IN
TRANSIENT REVERSIBLE RESP SYS & SKIN IRRIT, DIZZ, DFCLTY IN BRTHG,
& UNCON. CHRONIC: NONE KNOWN. CHLOROCARBON/CH LOROFLUOROCARBON
(CFC) MATLS HAVE PRODUCED SENSIT OF THE MYOCARDIUM TO EPINEPHRINE
IN LAB ANIMALS & COULD (SUPP DATA)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:INHAL:MAY BE IRRITATING TO LUNGS & RESP
PASSAGES. AT HIGH CONCS FLUOROCARBON COMPONENT MAY CAUSE DIZZ,
DFCLTY IN BRTHG & POSS NARCOSIS. SKIN/EYES:IRRIT MAY DEVELOP
FOLLOWING SKIN/EYE CONT. DERM MAY DE VELOP AFTER RPTD &/PRLNGD CONT
W/HUMAN SKIN. SKIN ABSORB:TOX CONC ARE UNLIKELY TO BE ABORBED THRU
SKIN. (SUPP DATA)
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY AND SKIN
PROBLEMS MAY BE AGGRAVATED BY EXPOSURE TO THIS MATERIAL.

First Aid:EYE: FLUSH IMMED W/COPIOUS AMTS OF WATER FOR AT LEAST 15 MIN.
CONSULT TRAINED MD PERS IMMD. SKIN: FLUSH-IMMED W/WATER. THE
AFFECTED AREA SHOULD THEN BE WASHED WITH SOAP AND WATER.
INHAL:REMOVE VICTIM TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP,
PREFERABLY BY MOUTH TO MOUTH METHOD. IF BREATHING IS LABORED, GIVE
O*2. CONSULT MD PERS. INGEST: IF INGESTED, INDUCE VOMIT & CALL MD
AT ONCE.

Flash Point Method:CC
Flash Point:269F,132C
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE.
Fire Fighting Procedures:NONE KNOWN. WEAR NIOSH/MSHA APPROVED PRESSURE
DEMAND SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THERMAL DECOMP PRODS MAY INCLUDE
FLUORIDES, CHLORIDES & PHOSGENE . POSSIBLE TRICHLOROFLUOROMETHANE
BREAKDOWN TO TOXIC GAS AT EXTREMELY HIGH FIRE TEMPS.

Spill Release Procedures:AVOID BREATHING FUMES-USE ADEQUATE FRESH AIR
SUPPLY. SPREAD WITH ABSORBENT MATERIAL AND SHOVEL INTO SEALABLE
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN ORIGINAL CNTNRS AWAY FROM
HEAT & MOISTURE. STORE INDOORS BETWEEN 50-75F.OPEN CNTNRS CAREFULLY
TO ALLOW ANY PRESS BUILDUP TO BE VENTED SAFELY.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GEN VICINITY
OF ARC WELDING/OPEN FLAMES/HOT SURFS. HEAT AND/OR UV RADIATION MAY
CAUSE THE FORMATION OF CHLORIDES, FLUORIDES/PHOSGENE . RESTRICT
ACCESS OF NON-APPLICATION PERSONNEL.

Respiratory Protection:NIOSH/MSHA APPROVED FRESH AIR FULL FACE MASK OR
HOOD WITH FRESH AIR SOURCE.
Ventilation:OUTDOORS:CLOSE ALL AIR INTAKE VENTS, ON AIR HANDLING EQUIP
ON BUILDINGS. INDOORS:USE LOC EXHST IF AEROSOL IS GENERATED.
Protective Gloves:CHEMICALLY RESISTANT PLASTIC OR RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:FABRIC COVERALLS AND RUBBER APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HLTH HAZ:HAVE A SIMILAR EFT IN HUMANS. ADRENOMIMETICS (E.G.,
EPINEPHRINE) MAY BE CONTRAINDICATED EXCEPT FOR LIFE-SUSTAINING USES
IN HUMANS ACUTELY OR CHRONICALLY EXPOSED TO CHLOROCARBONS/CFC'S .
EFTS OF OVEREXP:INGEST:PROD IS PRACTICALLY NONTOX BY INGEST. IRRIT
OF THE GI TRACT MAY OCCUR.

HCC:N1
Boiling Pt:B.P. Text:>82F,>28C
Vapor Density:5.67 @ 86F
Spec Gravity:1.20
Evaporation Rate & Reference:GREATER (BUTYL ACETATE=1)
Solubility in Water:MODERATE
Appearance and Odor:AMBER LIQUID-NEGLIGIBLE ODOR; SLIGHTLY AROMATIC.

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CHLORIDES, FLUORIDES & PHOSGENE .
POSSIBLE BREAKDOWN OF TRICHLOROFLUROMETHANE TO TOXIC GAS.

Waste Disposal Methods:DISPOSE OF ALL WASTES I/A/W FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.